Little Wolf Ranch
Well-Known Member
This past April, I only had a setup available for one mare to be foaled out in a 10x10 stall with one camera. This upcoming February I am currently expecting FOUR mares to be foaling out at about the same time, but we all know how that goes! January and February are the coldest months for us here at our farm - with the temperatures dropping into the teens during the nights. We usually only have one or two episodes of snow and when we do, they only last for a few days - a week at most.
We are currently adding onto this building and when it is all said and done - we are going to have one large building that will stand 18x20 and will have two 10x10 stalls (((one for my 37.50" mare & one for my 33.50" mare))) and two 8x10 stalls (((one for my 32.25" mare & one for my 31.25" mare))) for foaling. The dividers and gates will be made from PVC and there will be "french door style" gates that swing both both ways to allow for easier access, air flow, and be able to use my two cameras to view all four stalls at once.
I will be using water buckets that sit on the ground and hanging feeders for grain. I wish I could have automatic heated waterers for my girls but we aren't set up for that and can't do it at this time. I will have a halter & lead rope rack hanging high and away from any possible horse to reach, since I don't have a conjoined tack or feed area and it is located in a seperate building (to prevent those sneaky horses from colicing or foundering on grain in the middle of the night).
My main question is, what are your "HAVE TO'S" for your regular stalls & foaling stalls? I want to be sure that I can have everything as good-to-go as possible and hopefully we can have it all together!
Thanks & God Bless
Katie Guinn and the herd!
EDITED TO ADD:
Where can you get the creep feeders for Miniature Horse foals?
We are currently adding onto this building and when it is all said and done - we are going to have one large building that will stand 18x20 and will have two 10x10 stalls (((one for my 37.50" mare & one for my 33.50" mare))) and two 8x10 stalls (((one for my 32.25" mare & one for my 31.25" mare))) for foaling. The dividers and gates will be made from PVC and there will be "french door style" gates that swing both both ways to allow for easier access, air flow, and be able to use my two cameras to view all four stalls at once.
I will be using water buckets that sit on the ground and hanging feeders for grain. I wish I could have automatic heated waterers for my girls but we aren't set up for that and can't do it at this time. I will have a halter & lead rope rack hanging high and away from any possible horse to reach, since I don't have a conjoined tack or feed area and it is located in a seperate building (to prevent those sneaky horses from colicing or foundering on grain in the middle of the night).
My main question is, what are your "HAVE TO'S" for your regular stalls & foaling stalls? I want to be sure that I can have everything as good-to-go as possible and hopefully we can have it all together!
Thanks & God Bless
Katie Guinn and the herd!
EDITED TO ADD:
Where can you get the creep feeders for Miniature Horse foals?
Last edited by a moderator: